Home > Candidates > Mohammed Hassoun
Mohammed Hassoun

Salmiya Hawalli, Kuwait

Phone: xxx-xxx-xxxx

Email: xxx@xxxx.xxx



  • Looking For: Gas Turbines, Mechanical engineering

  • Occupation: Management

  • Degree: Bachelor's Degree

  • Career Level: Experienced

  • Languages:

Career Information:

Sign up to view Mohammed Hassoun's full profile.

Highlights:Mechanical engineer for Operation and Maintenance Gas Turbines. LM6000 PC. Frame 5 MS 5001P

Skills:Gas Turbine, Steam Turbine, Pump, axial Compressor, Project management

Goal:I'm a Mechanical engineer I have worked within the Various engineering environment including (Manufacturing, Operation, Repairs, Maintenance and Commissioning). I have worked more than 10 years in Power generation field including (Gas turbines, HRSG, Boilers, and Steam Turbines). I'm well versed in quality standards, as (ASTM, B.S., and DIN) Standards, I have wide experience in LOTO progresses for PTW in Energy field. I'm an effective leader, Proactive, fast learner if it needed for new challenges which within a very short period of time, have to lead me to be trusted my high management (MD and Directors) and approached for strategic advice, decision, and the establishment of business processes. I have a good Knowledge of Project management, I had the 40Hrs attendance of PMP. I am an effective leader, proactive, fast learner, which within a very short period of time have led me to be trusted by management ( MD and Directors) and approached for strategic advice and decision and establishment of key business processes. I have a good knowledge of project management.

Membership:Egyptian Syndicate for Engineers. Kuwaiti Society for Engineers

Certification:B.Sc. Mechanical engineering. ICDL


Experiences:

Team Shift Leader 09/2016 - current
TNB Remaco-Kharafi National (JV), Doha, Al-jahra Kuwait
Industry: Energy
I joined TNB-KN in Kuwait as Mechanical Engineer. The power plant contains (LM6000 PC * 5 units) and several auxiliaries (Air compressors, Gas Compressors, chiller, water treatment system, firefighting system and 5 Auxiliaries transformers)
- My duties include but not limited to: - Team leader of Gas turbines and auxiliaries. - Coordinating P.T.W. instructions and Safety issues with Maintenance departments for units and auxiliaries. - The responsibility of daily Operation activities reports topping management and MEW. - Monitoring performed Gas Turbines units and auxiliaries. - Organizing and supporting the staff while starting up and shutting down GT units.--
Project Engineer / SR. Lead Engineer 05/2015 - 05/2016
Supreme Group, Gao, Gao Mali
Industry: Construction-Commissioning
I joined Supreme Construction operations in Africa projects centered in Mali, as a project engineer for Multi-Million dollars Projects in Mali, Supreme group is the prime fuel Supplier “Diesel, Jet” and one of the major contractors for the United Nations mission in Mali “MINUSMA”, US Department of Defense “DOD”, UK Ministry of Defense, Supreme build, own and operate fuel plants in more than 22 cities in Mali for the UN.
- My duties include but not limited to: - Plan and achieve the most cost and time efficient plan - Allocate resources to accomplish the project in hand - Review and adapt designs in the field and coordinating with the designer to meet the client requirements - Efficiently estimating and ordering the bill of materials - Verify quality standards and international construction standards are being met efficiently on hand - Technical decision making in Civil, Mechanical and Electrical work aspects - Coordinate and running meetings between different sub-contractors - Scheduling and reporting to senior management - Foresee possible obstacles and planning appropriate solutions to overcome it - Plan and oversee day to day activities--
(O&M) Mechanical engineer 04/2005 - 04/2015
Middle Delta for Electricity Production Co., Talkha, Dakahlia Egypt
Industry: Energy
I’ve joined MDEP that was because of my dedication and performance plus the history and personal reputation I have there. The Plants contains (MS 5001P * 8 units) Mark VIe and STAG 405 as Steam Turbines * 2 units (50MW)
I’ve Rejoined MDEP again that was because of my dedication and performance plus the history and personal reputation I have there. The Plants contains (MS 5001P * 8 units) Mark VIe - My duties included but weren’t limited to: -Scheduling, reporting and assisting the Sector Manager - Plan and oversee day to day Maintenance activities - Plan and achieve the most cost and time efficient plan - Efficiently estimating and ordering the bill of materials - Performing commissioning reports for all units after inspections. - Performing overhaul (major) inspection for Gas turbine units. - Performing Hot paths inspection for units. - Performing Combustion chambers inspection for Units. - Performing all tolerance and alignments for all mechanical parts. - Dealing with daily Troubleshooting and manage it. - Inspect all clearance for all the units which were at inspections and manage it in the rated by forming at an interior workshop. - Surveying Tenders of Spare parts for Gas turbines. - Supervising the annual inventory for warehouses of spare parts April 2005 – June 2007: Mechanical operation Engineer “Power Plant Operation and Maintenance” Middle Delta Electricity Production Co. (MDEP Co.) Talkha power plant section. - My duties included but weren’t limited to: -Scheduling, reporting and assisting the Sector Manager - 1st Shift engineer in the plant and performing the daily technical report while night shift. - Operating steam turbine units (2 x 45 Mega Watts). - Operating HRSG (Heat Recovery Steam Generator) of (8 x 45 tons Steam/Hour). - Operating gas units (8 x 25 Mega Watts). - Dealing with firefighting of the site. - Knowledge of makeup of Distilled water for the steam turbine. - Performing switchgear operation with National Control Center to connect and disconnect 220 K.V grid function. - Dealing with different types of transformers (11.5/220Kv, 11.5/3Kv, and 11.5Kv/400v), Transformers Lines and protection equipment. - Dealing with different types of mechanical equipment (Boilers, Pump sand compressors)--
Lieutenant Officer and commander of the Military workshop 12/2003 - 03/2005
Egyptian Ministry of Defense/ Egyptian Armed Forces, Suez, Suez Egypt
Industry: Maintenance
During my military service, I worked in a field matching my academic background which gave an early kick-start to my engineering career in the Maintenance department for diesel engines.
--

Education:

Mansoura University 10/1998 - 06/2003
Mansoura, Dakahlia, Egypt
Degree: Bachelor's Degree
Major:Mechanical Engineering
Minor:Industrial production and machine design
Sep-1998 Till May-2003: Bachelors of science degree (B.Sc.) In Industrial and Mechanical Engineering “5 Years Degree”, Accredited Mansoura University, Mansoura, DK, Egypt -Major: Industrial and Mechanical Engineering -Accumulative Grade is (GOOD) -Last Year Grade was (Very Good) -Graduation Project Grade is (Excellent)


Download Resume(Available to Employers Only):

Hassoun C.V. (O&M) Mechanical engineer for GTCC



More About Mohammed Hassoun
Please sign in or sign up an employer to view Mohammed Hassoun's personal information.

  • Phone: xxx-xxx-xxxx
  • Email:xxx@xxxx.xxx
  • Visa: -
  • Work Authorization: -
  • Expected Salary: -
  • Intests & Hobbies: -