Jagna Bohol, Philippines
Phone: xxx-xxx-xxxx
Email: xxx@xxxx.xxx
Looking For: NDT engineer, NDT inspector
Occupation: Architecture and Engineering
Degree: Bachelor's Degree
Career Level: Experienced
Languages:
Highlights:NDT Engineer with Ultrasonic and Radiography (EN4179, NAS 410) LEVEL 2 qualification. and a LICENSED AVIATION MAINTENANCE TECHNICIAN (Airframe and Powerplant) from Civil Aviation Authority of the Philippines (CAAP/ICAO) License No.116616-AMT
Skills:NDT
Membership:NDT Level 2 EN4179/NAS410
Certification:NDT Level 2 EN4179/NAS410
NDT Engineer 12/2016 - current
Mubadala Strata, Al ain, Abu Dhabi United Arab Emirates
Industry: Aviation
promoted to NDT Engineer from NDT inspector position
• Responsible for reviewing and updating UT and RT Work instruction before the Audit (Internal and NADCAP).
• Responsible for conducting Audit to inspectors base on the work instructions.
• Responsible for ensuring all NDT equipment and reference standards are all calibrated and documented.
• Responsible for preparing the A350 eFSF movable and top cover reference standard qualification.
• Responsible for preparing the Quality Test Plan(QTP) and Work instruction(WI) of Tecnatom robotics for TTU inspection of B777,B787 Ribs and A330/A340 Aileron panels.
• Involve in conducting Root Cause Analysis using Fish bone and 5 why’s.
• Responsible for conducting penetrant testing on Aileron Lay-up tooling.
• Responsible for designing and making the A-scan inspection trolleys using Kaizen concept.
• Responsible for designing and making C-scan inspection fixtures for Boeing Ribs using Kaizen concept.
• Responsible for making the NDT defect library using the actual defects in scrap parts.--
QA/NDT Inspector UT and RT level 2 11/2010 - 12/2016
Mubadala Strata, Al ain, Abu Dhabi United Arab Emirates
Industry: Aviation
NDT Qualifications:
• Ultrasonic Inspection (EN4179, NAS 410) LEVEL 2
• Radiography Inspection (EN4179, NAS 410) LEVEL 2
• Performs visual inspection for any discontinuities on the part.
• Making programs for X-ray manipulator (Teach-in)
• Performs X-ray Real Time Inspection on A380 Flap Track Fairing
• Performs X-ray Real Time Inspection on Spoiler
• Performs UT inspection for delamination on drill hole area of Aileron panels.
• Performs Phased Array inspection using Olympus OmniScan MX2 on Aileron panels.
• Performs A-scan and C-scan Inspection on A380 Flap Track Fairing.
• Performs A-scan Inspection on A350-900/1000 Fixed and Movable Fairing.
• Performs Flange Thickness/Width Inspection on Airbus 330/A340 Flap Track Fairing before assembly.
• Performs Backlight and Tap Test Inspection on composite sandwhich/core area of A330/A340 Flap Track Fairing
• Performs Jig Inspection before drilling and installation of parts in the A330/A340 Flap Track Fairing
• Performs Paint Inspection on Flap track fairings before delivery.
• Knows how to use the SAP system.--
Aircraft Structural Technician 11/2008 - 05/2009
Bombardier Aerospace, Belfast, belfast, northern ireland United Kingdom
Industry: Aviation
AIRCRAFT HANDLED:
• CRJ1000
• CRJ900
• Performs barrel (fuselage) jointing.
• Performs fastener installation on panels
• Performs drilling and countersinking on skin and other parts of the aircraft
• Installation of aircraft parts base on the Drawing.
• Installation of frames, stringers, cleats, intercostals, skin and other aircraft parts on the panel.--
Aircraft Structural Technician/Cabin Mechanic 04/2008 - 10/2008
Singapore Jamco/ Singapore Airlines Engineering Company, singapore, Singapore
Industry: Aviation
AIRCRAFT HANDLED:
• A340-500
• A320
• B747- 400
• B777
• Installation of frames, stringers, cleats, intercostals, skin and other aircraft parts on the panel.
• Performs rivet installation on skin.
• Performs drilling and countersinking on skin and other parts of the aircraft.
• Performs seat track repair, and installation.
• Performs doubler repair, patching splicing.
• Install and remove aircraft fasteners such as solid, blind rivet and hi-lok.
• Prevent, remove, and treat corrosion on aircraft structures.
• Interpret SRM (Structural Repair Manual)
• Performs lay- out, bending, and forming on aircraft sheet metal parts.
• Performs Cabin jobs such as removal and installation of wall and ceiling panel.
• Performs removal and installation of floorboards.
• Performs Galley Removal and installation.
• Performs removal and Installation of Aircraft seats from Economy to business class.--
Cebu Aeronautical Technical School 06/1997 - 03/2002
Cebu, Cebu, Philippines
Degree: Bachelor's Degree
Major:Aircraft Technology
LICENSED AVIATION MAINTENANCE TECHNICIAN (Airframe and Powerplant)
Civil Aviation Authority of the Philippines (CAAP/ICAO) License No. 116616-AMT