Highlights:

Skills:Structural Designer

Membership:2003 – Present Board of Civil Engineering, Philippines Professional Civil Engineer 2004 – Present Board of Master Plumber, Philippines Registered Master Plumber

Certification:2006 – 2006 AUTODESK, USC-Architecture Computer Centre (Authorized Training Centre) Cebu City AutoCAD 2002 (3D Module) 2006 – 2006 CAD International Training Centre, Inc., CAD International Training Center, Inc. Manila Philippines. Computer Aided Structural Analysis & Design using STAAD.Pro. 2006, 200. 2010 – 2010 CAD-IT Consultants (Asia) Pte. Ltd. Performing Design Verification Using Simulation in ANSYS 12.1 2010 – 2010 SETSCO Services Pte. Ltd. Course on Visual Inspection of Welds 2004 – 2004 Department of Public Works and Highways (DPWH), Cebu City, Philippines Construction Materials and Quality Assurance (57 Hrs. Lecture and 3-day Workshop) 2003 – 2003 Technical Education and Skills Development Authority (TESDA), Philippines Computer Technician Training Course 2017 – 2017 St, Hua Private School (Singapore) Autodesk Revit Architecture 2018 – 2018 CS Global Group Pte, Singapore Autodesk Revit Structure Fundamentals Training Autodesk Revit Structure Advanced Training

Structural Draftman October 2020 - September 2921
Quest Global Pte. Ltd., Singapore, Singapore Singapore
Industry: Shipbuilding
a year as a structural Draftsman for Subsea 7 for 28 Jackets Project for Saudi Aramco
• Produced structural support drawings for offshore platform components on barge transportation and installation drawings upon arrival on site. • Produced lifting and installation drawings for subsea pipe components and equipment. • Produced anchor patterns for transportation & installation sequence drawings. • Performed feasibility checks of installation methods. • Interfaced with other disciplines to obtain input for designs and drawings and to develop clash free designs. • Assisted in identification of technical problems and contributed with possible solutions. • Conducted self-check and colleagues on design drawings within the Project team and provide insight of better design method within the scope of my experience and level of competence. • Provided feedback and input to improve departmental standards, working methods and guidelines • Prepare drawings and designs consistent with good engineering practice and in compliance with company drawing office procedures--
Structural Designer January 2019 - October 2019
Quest Global Pte. Ltd., Singapor, Singapore Singapore
Industry: Shipbuilding
A year as a structural Designer under contract to Keppel Marine Deepwater Technology for a new Semi-Submersible projects "Ocean Onyx" by Diamond Offshore
• Assist Engineering manager on assigned tasks such as basic design drawings and report its status through emails and discussion meetings. • Developed basic design drawings for various structural deliverables of the project as per contract scope of work within stipulated budget schedule and quality. • Verify with Engineering manager and Engineer’s on the results of structural reports before developing basic structural drawings of structure. • Read and review approve structural reports of classification bodies in order to check and verify the conformity of basic design drawings. • Update all feedback being highlighted in approve comments and reports issued by Project owners and Classification bodies. • Ensure that all design concepts and details comply with the design specification and builder standards. • Utilize CAD and other Office application software to generate quality work and proper documentation of projects.--
Senior Structural Engineer January 2016 - January 2019
CSIM Systems Pte. Ltd., Singapore, Singapore Singapore
Industry: Consultancy/Engineering
3 years as a Senior Structural Engineer for CSIM Systems Pte. Ltd, focusing on consultancy work providing structural analyses on various marine and offshore structure.
• Assist Main Consultant on assigned tasks, report progress and status through emails and meetings. • Liaise with DNVGL Class representative on technical matters on assigned projects. • Utilized Patran/Nastran 2010 to develop FEA model of structure in preparation for structural analysis. • Utilized Sestra (DNV) for post analysis of results to generate structural analysis reports. • Performed both Global and local structural strength analyses as per Project requirements • Reviewed and checked, calculations and analyses as per Project requirements • Prepared structural reports, structural drawings for class & owner approval. • Performed Discipline Document Verification for consistency on drawings, reports and 3D CAD model • Provide engineering assistance to the Construction team, including field inspections • Contributed in handling engineering/construction site queries and feed backs. • Contributed to a good working environment within consultancy team--
Structural Designer February 2015 - August 2016
Mai Engineering, Singapore, Singapore Singapore
Industry: Shipbuilding
A year as a structural Desginer under contract with Keppel Singmarine Pte. ltd. for BP Exploration (Shah Deniz) Ltd. Subsea Construction Vessel (SCV).
• Developed Main Scantling Plans of the Marine Hull Structure in the Subsea Construction Vessel (SCV). • Developed Main Scantling Plans of the Accommodation/Living Quarter Structure. • Checked production drawings of a vessel and ensure its conformity with the basic design. • Provide engineering assistance to the Construction team, including field inspections • Ensured that all design complies with shipyard’s construction standards and the project’s design specification.--
Structural Designer July 2012 - August 2013
Frigstad Engineering Pte. Ltd., Singapore, Singapore Singapore
Industry: Marine and Offshore
2 years as a Structural Designer in Frigstad Engineering Pte. Ltd. For 2 Semi-Submersible projects, the Semi-submersible Frigstad T70 Tender Assisted Drilling Unit and the Semi-submersible Frigstad D90 Mobile Offshore Drilling Unit.
• Assist Engineering manager on assigned tasks such as basic design drawings and report its status through emails and discussion meetings. • Developed Main Scantling Plans of the Pontoon, Column and Upper Hull Structure of the vessel. • Developed Main Scantling Plans of the Accommodation/Living Quarter Structure. • Developed detailed design plans for equipment foundations and other outfitting structure. • Produced Hull weight and center of gravity calculation for the entire vessel. • Ensured that all design concepts and details comply with the design specification and builder standards. • Utilize CAD and other Office application software to generate quality work and proper documentation of projects.--
Structural Designer March 2011 - March 2012
Mai Engineering Pte. Ltd., Singapore, Singapore Singapore
Industry: Shipbuilding
A year as a Structural Designer under contract to Keppel Shipyard Ltd. for 3 FPSO project, Conversion FPSO Cidade de Paraty by SBM Offshore, Conversion FPSO ASENG by SBM Offshore and Conversion FPSO Berantai by Petrofac
• Provide engineering assistance to the Construction team, including field inspections. • Developed detailed construction drawings of the Hull, Accommodation and other outfitting structure. • Developed detailed construction drawings for equipment foundations and other outfitting structure. • Developed conceptual design of structure in line with the design specification of the project. • Developed Bill of Material and weight calculation. • Ensured that all design complies with shipyard’s construction standards and the project’s design specification.--
Structural Designer July 2008 - November 2010
Mai Engineering Pte. Ltd., Singapore, Singapore Singapore
Industry: Shipbuilding
2 years as a structural Designer under contract to Sembawang Shipyard Pte. Ltd.
• Developed detailed construction drawings of the Hull, Accommodation and outfitting structure. • Developed detailed construction drawings for equipment foundations and other outfitting structure. • Developed revision and repair plans for non-conformity of design. • Developed as-built drawings of the new structure. • Utilized Tribon M3 Structure, for modeling and Tribon M3 Drafting, to generate detailed structural drawings. • Produced basic calculation on beam and pad eye capacity of various lifting works--
Design Engineer I June 2005 - November 2008
Tsuneishi Technical Services Philippines Inc., Cebu, Cebu Philippines
Industry: Shipbuilding
3 years as a Design Engineer in Tsuneishi Technical Services Philippines Inc. With months of training in Japan.
• Developed detailed construction drawings of the vessel’s assembly blocks. • Developed schedule and monitor detailed construction drawings for production use. • Developed assembly plans of the vessel’s assembly block. • Developed parts listing of the vessel’s assembly blocks. • Produced Hull weight and center of gravity calculation of assembly block. • Ensured that all issued documents comply with the class approved documents pertaining to the design of the structure • Provide engineering assistance to the Construction team, including field inspections • Contributed in handling engineering/construction site queries and feed backs. • Utilized Cadwin-2D CAD to generate and modify nested assembly parts of the Ship’s Blocks before steel cutting. • Organized all data and documents in a spreadsheet format for easy access to other department needing such information--

Southwestern University 06/1994 - 03/1998
Cebu, Cebu, Philippines
Degree: High School Or Below
Major:High School
High School

Login to view resume: Structural Designer -